How much does a well pump cost to run in North Carolina?

$3.03 a month

A day of use
$0.10
An hour of running
$0.10
A year
$36.32

675 W, 1 hour a day of pumping, at North Carolina’s average rate of 14.7¢ per kWh (EIA, June 2026). How we calculate this

Change the watts, hours or rate
I know the appliance's

What it costs at other usage levels

Well pump at 675 W and 14.7¢ per kWh
UseA dayA monthA year
1 hour a day typical$0.10$3.03$36.32
2 hours a day$0.20$6.05$72.63
4 hours a day$0.40$12.11$145.26
8 hours a day$0.80$24.21$290.53
24 hours a day$2.39$72.63$871.58
Monthly cost of a well pump in North Carolina, nearby states and the USNorth Carolina: $3.03; Georgia: $3.36; South Carolina: $3.19; Tennessee: $2.89; Virginia: $3.54; US average: $3.77North Carolina$3.03Georgia$3.36South Carolina$3.19Tennessee$2.89Virginia$3.54US average$3.77

Models range from 250 W to 1,100 W (Virginia Cooperative Extension). We use 675 W, the middle of that range.

North Carolina compared with other states

CheapestMost expensive

North Carolina’s residential rate is the 11th cheapest of 51 states and DC, 3.6¢ below the US average of 18.3¢ (−20%).

Ways to spend less

  • Fix leaks and running toilets; every gallon is pumped.
  • Check the pressure tank's air charge so the pump doesn't short-cycle.
  • Water the garden early in the morning so less evaporates.

Questions

How much does it cost to run a well pump per hour?

About $0.10 an hour in North Carolina. A well pump at 675 W uses 0.675 kWh per hour, and at North Carolina’s average of 14.7¢ per kWh that comes to $0.10.

How much does a well pump add to your electric bill?

Used 1 hour a day of pumping, about $3.03 a month in North Carolina, or $36.32 a year.

How much does it cost to run a well pump 24 hours a day?

Running nonstop, a well pump would use 16.2 kWh a day and cost $2.39 a day, or $72.63 over an average month in North Carolina.

How many watts does a well pump use?

Models range from 250 W to 1,100 W (Virginia Cooperative Extension). We use 675 W, the middle of that range. Check the label on yours: cost scales directly with watts, so a 20% lower wattage means a 20% lower bill.

Why does a well pump cost more or less to run in North Carolina than elsewhere?

North Carolina’s residential rate is the 11th cheapest of 51 states and DC, 3.6¢ below the US average of 18.3¢ (−20%). The appliance uses the same energy everywhere; only the price per kWh changes.

Sources

Usage assumptions (hours a day, season) are ours and listed on the methodology page. Found an error? Tell us.