Window AC electricity cost

Enter measured energy or a cooling schedule, then see daily, active-month and season costs.

Electricity for your entered use

$0.77 per use day

Annual average: $9.81/month across 12 months. Only entered energy is included; purchase costs and unentered loads are excluded.

Average active month
$23.39
Selected season / year
$117.66
Energy per use day
4.20 kWh

18.31 cents/kWh · US EIA residential benchmark, 2026-07

One full-power cooling hour at your entered watts: $0.19. This is different from an hour of thermostat-controlled availability.

An average active month is 365/12 (30.42) days. Your season: 153 calendar days × 7/7 = 153.00 use days. Monthly cost uses the same weekly share.

A zero fan or standby entry excludes that energy. The cooling rating does not supply those separate measurements.

GE AHC12AZ: 1050 W cooling input. Manufacturer cooling input, not an average duty-cycle reading. Installed-equipment example; manufacturer says no longer manufactured. The starting schedule is illustrative. Edited watts override the reference; measured energy bypasses it.

Download CSV

The CSV includes the entered assumptions. Scenario URLs contain these inputs and may remain in browser history or hosting logs.

Your energy and schedule

Starting power reference: GE AHC12AZ. Edit its watts below or load a different named example. Measured mode uses your reading directly.

Use a representative full-day reading. Do not apply a compressor duty cycle again.

Measure both units in the same room and over the same daily use period, with the same target temperature and comparable weather, sun and occupancy. Confirm both achieved the comfort target. This tool does not verify or adjust those conditions.

A label for your second measured unit; up to 80 characters.

A full-day measurement using the same daily boundary. Include all its cooling, fan and standby energy in this reading.

Record the matched room, daily hours and settings; up to 80 characters. This note does not change the calculation.

Electrical input while the compressor runs, including its fans. Do not enter BTU/h, CEER or compressor-only watts.

For 24/7 availability enter 24; the duty setting below controls how much of that time the compressor runs.

50% is an illustrative schedule. Use 100% with measured average power; measured daily kWh is better for variable-speed units.

Fan-only and standby energy

Used during compressor-off time and extra fan-only hours. Enter the measured average in those periods, or 0 if the fan stops.

Outside the cooling-mode hours. For fan-only operation set cooling hours to 0 and enter the fan schedule here.

Applied to the remaining hours of each use day. Off-season and unused-day standby are excluded.

Use comma-separated months 1-12; blank means all year. Example: 5,6,7,8,9 is May to September. A non-leap year is used.

Applied as a weekly average across the selected calendar months; fractional use days are possible.

Electricity price

Used only when you choose your own rate. Include variable supply, delivery and taxes.

Find the variable rate on your bill

State averages include fixed-charge revenue spread across kWh. They give benchmark costs; avoided bill charges depend on your own variable rate. Compare full tariff costs.

Reset example

Energy by operating phase

Your entered schedule; energy per use day
PhasekWh
Cooling while compressor runs4.200
Fan during compressor-off time0.000
Extra fan-only time0.000
Remaining hours on a use day0.000

Read the model record before using a rating

Named window-AC examples

These manufacturer specifications cover three installed-equipment sizes. GE marks all three models as no longer manufactured. Their published cooling watts are input ratings, not a prediction of average operation. Loading an example resets the schedule and keeps the selected state benchmark.

Manufacturer specifications checked September 27, 2026; 115 V models
Model and sourceCapacity BTU/hCooling wattsCEERExample
GE AHW05LZ5,05045511.0Load GE AHW05LZ
GE AWES08WWF8,00068010.9Load GE AWES08WWF
GE AHC12AZ12,0001,05011.4Load GE AHC12AZ

The AHW05LZ is marketed as 5,000 BTU, while its detailed specification gives 5,050 BTU/h; the table retains that specification. Capacity helps describe the equipment. It is not converted into watts, and these differently sized models are not an equal-cooling efficiency comparison.

CEER and annual EnergyGuide energy describe test conditions. The calculation here uses entered electrical power and time, or measured daily kWh. For a variable-speed compressor, a representative measured kWh reading captures modulation better than an assumed on/off percentage.

Schedule energy is whole-unit cooling watts × cooling hours × compressor on-share, plus fan watts during the remaining cooling hours and extra fan-only hours, plus standby watts during the rest of the day. Divide watt-hours by 1,000. Fan-only mode requires cooling hours of zero and an entered fan power and runtime.

Portable AC, window AC or a fan?

Compare the same room, weather, occupancy, target temperature and comfort period. Measure each AC's energy while it achieves that task. Equal BTU labels, equal runtime or the two starting examples do not establish equal cooling. A fan moves air and can improve comfort, but does not remove room heat. Electricity cost here excludes equipment price and installation.

Window AC tool · Portable AC tool · Fan electricity examples

Make the estimate useful

  • Use measured whole-unit kWh when the compressor modulates or cycles unpredictably.
  • Include fan and standby energy if those modes run when the compressor is off.
  • Compare cooling in the same room, weather and thermostat conditions; a fan does not remove heat from the room.

Model sources checked September 27, 2026. State averages are benchmarks; avoided bill charges depend on your variable tariff.

Sources

Usage assumptions (hours a day, season) are ours and listed on the methodology page. Found an error? Tell us.

Same starting example, different state rates

These benchmarks always use the original model and schedule, not your edited inputs above. Select a state in the form to calculate your scenario at its rate. The table's active month is 365/12 days; its annual cost includes May through September only.

8 hours per day, May to September, compressor on 50% of the time; fan and standby excluded; no fan or standby addition
StateCents/kWhActive monthSeason / year
Alabama16.40$13.57$68.25
Alaska28.83$23.85$119.98
Arizona15.38$12.72$64.01
Arkansas14.33$11.86$59.64
California33.61$27.81$139.87
Colorado17.00$14.06$70.75
Connecticut24.16$19.99$100.54
Delaware18.48$15.29$76.91
District of Columbia25.21$20.86$104.91
Florida15.03$12.43$62.55
Georgia16.27$13.46$67.71
Hawaii48.00$39.71$199.76
Idaho13.73$11.36$57.14
Illinois19.22$15.90$79.99
Indiana16.73$13.84$69.62
Iowa15.99$13.23$66.54
Kansas15.27$12.63$63.55
Kentucky13.81$11.43$57.47
Louisiana12.72$10.52$52.94
Maine32.41$26.81$134.88
Maryland21.41$17.71$89.10
Massachusetts30.49$25.23$126.89
Michigan23.05$19.07$95.92
Minnesota17.45$14.44$72.62
Mississippi14.54$12.03$60.51
Missouri16.09$13.31$66.96
Montana14.99$12.40$62.38
Nebraska13.78$11.40$57.35
Nevada12.77$10.57$53.14
New Hampshire26.60$22.01$110.70
New Jersey25.19$20.84$104.83
New Mexico16.09$13.31$66.96
New York29.90$24.74$124.43
North Carolina15.16$12.54$63.09
North Dakota13.41$11.09$55.81
Ohio19.45$16.09$80.94
Oklahoma14.35$11.87$59.72
Oregon15.97$13.21$66.46
Pennsylvania21.72$17.97$90.39
Rhode Island28.29$23.41$117.73
South Carolina15.47$12.80$64.38
South Dakota15.37$12.72$63.96
Tennessee13.71$11.34$57.06
Texas15.88$13.14$66.09
Utah13.12$10.85$54.60
Vermont23.75$19.65$98.84
Virginia17.55$14.52$73.04
Washington14.71$12.17$61.22
West Virginia15.78$13.06$65.67
Wisconsin19.06$15.77$79.32
Wyoming14.36$11.88$59.76

Questions

How much does an AC cost per hour?

For a full-power cooling hour, multiply electrical watts by cents/kWh and divide by 100,000 to get dollars. Thermostat-controlled hours can include compressor-off, fan and standby periods.

How do I estimate running an AC 24/7?

Enter 24 cooling-mode hours per use day and the observed compressor on-time. Enter all 12 months for year-round availability. A 100% duty setting models continuous operation at your entered watts; it is not a forecast of actual cycling.

How do I calculate fan-only cost?

Set cooling-mode hours to zero, then enter fan watts and extra fan-only hours. Include standby separately if applicable. Measured whole-unit daily kWh can also be used.

Does annual label cost predict my bill?

No. Label costs use a specific test schedule and electricity rate. Use representative measured energy and your variable tariff; fixed charges and purchase costs are excluded here.

Start a household inventory with the original model example · Compare tariff periods and fixed fees